CH

INDUSTRY DYNAMIC

/ 0417-5316666

Vertical mill processing talc main advantages

POSTED TIME:2017-05-28 PAGE VIEW:224

(1) The talc source contains a certain amount of non-talc with a larger specific gravity and higher hardness than talc, which can be discharged from the edge of the grinding plate, dropped from the nozzle ring to the slag discharge port, and eliminated by the slag discharge conveyor. Due to the elimination of impurities, the purity of talc can be improved.


(2) the vertical mill is the material layer grinding principle, there is a material layer between the grinding wheel and the grinding disc, between the material and material extrusion grinding, high efficiency, good particle size shape.


(3) Because there is no contact or collision between the grinding wheel and the grinding disc, the whiteness will not be reduced in the grinding process. The same raw material will be two or three degrees higher than the whiteness of Raymond machining, which will significantly reduce the raw material cost.


(4) Because the vertical mill is the principle of pulverizing the material layer and the fine powder content is high, the processing speed of the bottom material processed by airflow mill will be significantly provided and a lot of power will be saved.


(5) Because there is no contact and collision between the grinding wheel and the grinding disc, the iron content of the powder is lower than that of the Raymond machine and the ball mill.


(6) Because the grinding wheel grinds the raw materials, the friction between the raw materials will produce a large amount of heat, so the drying effect is good, and the talc slag raw materials with high water content can be processed. The same raw material will be processed with a very low Raymond output, while reducing the whiteness.


(7) Single product is large, can be processed into fine powder at one time, can be continuous production without shutdown maintenance and oil injection.